The main characteristics of the Blendfor® range are:
- Excellent dimensional stability
- Excellent aesthetical properties
- Excellent impact resistance
- Good thermal properties
Blendfor ® (PC/ABS)
Polycarbonate/ABS compound
Blendfor® is the trade name of the PC/ABS blend (Acrylonitrile-Butadiene-Styrene and Polycarbonate ) manufactured by SO.F.TER. The product range also inlcudes reinforced and flame-retarded materials (UL94 V0).
Generally speaking the PC/ABS blend has a better impact resistance and thermal properties than the ABS compounds.
The main characteristics of the Blendfor® range are:
The main characteristics of the Blendfor® range are:
E&E, Automotive, Household appliances.
Blendfor® can be co-moulded with some special grades of the Laprene® range (SEBS-based thermoplastic elastomer).
Blendfor® is a resin for injection moulding.
The following temperature settings are recommended when processing standard materials:
The following temperature settings are recommended when processing standard materials:
- Cylinder temperature 230-260°C
- Mould temperature 50-70°C
- Drying 3h@90°C
Blendfor® is a fully recyclable material and can be reused after regrinding. The user shall always verify that the compound obtained by mixing virgin and reground material is suitable for the specific application and that its properties meet the requirements.
This product should be stored in a covered facility and kept away from moisture and heat.
Discover Easyplastic
Browse the applications and find the material that is most suitable for you. Immediately download the technical datasheet!
Enter Easyplastic